It's a common problem with a simple solution.Įnter your motherboard's BIOS settings by tapping F2or extinguishhow it turns on. If you install Windows 10 on a PC with this USB drive, your motherboard may not boot with it even if you set it to boot with USB first. That's it! Once Terminal successfully creates the bootable hard drive, simply unplug the USB from the desktop and use it to start a Windows installation. Wimlib-imagex split /Volumes/CCCOMA_X64FRE_EN-US_DV9/sources/install.wim /Volumes/WINDOWS10/sources/install.swm 3000

Rsync -vha -exclude=sources/install.wim /Volumes/CCCOMA_X64FRE_EN-US_DV9/* /Volumes/WINDOWS10Įnter the following command to split the install.wim file and copy it to the USB stick: Use the following command to copy the contents of the ISO image – with the exception of the install.wim file – to the USB drive: Hdiutil mount ~/Downloads/Win10_21H1_English_圆4.iso Alternatively, you can do this in Terminal with the following command, but make sure to replace the filename and path as needed: You can do this by double-clicking the ISO file it should then appear with the name in the connected devices CCCOMA_X64FRE_EN-US_DV9. Mount the Windows 10 ISO from the DownloadsFolder on your Mac. This will erase the USB storage device and rename it to WINDOWS10, which will be easier to distinguish later. Use the following command to format the USB stick (replace disk2 with your hard drive identifier):ĭiskutil eraseDisk MS-DOS WINDOWS10 GPT /dev/disk2 If you cannot see the USB storage device in the terminal, try to identify it using the “Size” column. appear (external, physical)As shown below. Make a note of the drive's hard drive ID – disk2, disk3, disk4, etc. Type disk listand press Enter in Terminal to see a list of all the drives connected to your Mac. Make sure your USB stick is connected to your Mac. Enter the commands to enable homebrew and then re-enter the above command for it to work successfully. In case you get an error message Command not found: brew, you may see two commands in the terminal right at the end of the previous homebrew installation.

When the installation is complete, enter the following command and press Enter to install wimlib: Xcode is an integrated development environment (IDE) that consists of software development tools for macOS.Įnter your Mac user password to authenticate and press Enter Install homebrew. It will download and install Xcode before installing Homebrew. The process may take a few minutes, depending on your internet connection. Enter the following commands and press Enter – This will install Homebrew on your Mac: To install Homebrew and create a Windows 10 bootable USB, go to finder> applicationsand start terminal.

Windows 10 iso for mac